For All Your Petrol and Diesel Generators, Lighting Towers, Hydraulic Generators and Power Generation Solutions

Expert Technical Advice

 Installation and Commissioning Services Available for Residential and Commercial  Applications

 

Main specifications

Type Canopied Standby power LTP 22 kVA Standby power LTP 18 kW Rated prime power (PRP) 21 kVA Rated prime power (PRP) 17 kW Rated continuous power (COP) 20 kVA Rated continuous power (COP) 16 kW Phases 3 Voltage 400 V Frequency 50 Hz Battery charger current 55 A Circuit breaker 32 Ratio 0,98

Engine specifications

Engine manufacturer Deutz Model F3M2011 Stroke 4, diesel Fuel Diesel Number of cylinders and disposition 3, inline Displacement 2330 cm³ Air intake Natural Starting system Electric Nominal operating speed 1500 rpm Speed governor Mechanical SAE 3 Flywheel 11,5 inches Continuous power COP 18,1 kW Prime power PRP 19 kW Standby power LTP 20 kW Lube oil capacity 5,5 l Coolant capacity n.a. Fuel consumption at 100% PRP 5 l/h Fuel consumption at 75% PRP 4 l/h Maximum lube oil consumption at PRP 0,3 % Electric circuit voltage 12 V Engine derating 1,0 Cooling fan Mechanical

Alternator specifications

Alternator manufacturer MeccAlte Model ECO 28 1L Poles 4 Revolution speed 1500 rpm Voltage 400 V Frequency 50 Hz Continuous nominal power at 40°C - COP 20 kVA Continuous nominal power at 27°C - PRP 21,2 kVA Standby power at 27 °C - LTP 22,4 kVA Continuous active power at 27°C - PRP 17 kW Efficiency at 75% load 88 % Efficiency at 100% load 87,6 % Maximum admitted overload 10% for 1 hour every 12 hours of running time S2 Voltage regulation system Electronic Alternator derating 1,0 Protection grade IP 23

Additional information

Fuel tank location Internal Fuel tank capacity 51 l Running time at 100% PRP 9,8 h Running time at 75% PRP 13 h Measured acoustic power (LWA) at 10 mt 91 dBA Noise level at 7 m 66 dBA Guaranteed noise level (LWA) 92 dBA

Dimensional data

Length 2000 mm Width 920 mm Height 1300 mm Dry weight 784 kg

Installation data

Cooling fan air flow rate 30 m³/min Combustion air flow at PRP 1,43 m³/min Exhaust gas flow at PRP 3,83 m³/min Exhaust gas temperature at LTP 540 °C Exhaust pipe diameter 60 mm Maximum admitted total exhaust backpressure 30 mbar

Equipments

Mechanical speed governor Optional Electronic speed governor Optional Radio interference suppression Optional Standard AVR (Automatic Voltage Regulator) Optional Optional AVR (Automatic Voltage Regulator) Optional Underspeed protection Optional 12 V electric circuit Optional 24 V electric circuit Optional Air intake filter Optional

Equipment: panel

On-board ACP (Automatic Control Panel) Optional ACP (Automatic Control Panel), delivered loose Optional On-board LTS (Load Transfer Switch) panel Optional LTS (Load Transfer Switch) panel, delivered loose Optional Power section with circuit breaker delivered loose Optional Power section with on-board circuit breaker Optional Differential protection Optional Engine coolant preheater Optional Manual oil draining pump Optional

Equipment: basic engine configuration

Optimized fuel consumption Optional

Equipment: starting system

Single pneumatic starter motor Optional Electric starter and compressed air starter Optional 2 electric starters with separate power supply Optional

Equipment: batteries

Batteries Optional Battery liquid Optional Battery disconnecting device Optional

Equipment: fuel feeding system

Air filters with contamination indicator Optional Fuel level sensor (minimum and maximum) Optional Fuel main filter Optional Fuel prefilter water separator Optional Electric valve for fuel circuit Optional

Equipment: lube oil system

Lube oil filler neck, dipstick Optional Lube oil fine filter Optional Lube oil cooler Optional

Equipment: exhaust line

No silencer option Optional Catalytic silencer Optional Spark arrester Optional Flexible exhaust compensator Optional Connection flanges to exhaust line Optional

Equipment: silencer

Industrial silencer -15 dB(A) Optional Residencial silencer -35 dB(A) Optional

Equipment: engine switches and senders

Fuel minimum level switch Optional Coolant minimum level switch Optional Coolant temperature switch Optional Coolant temperature sender Optional Lube oil minimum level switch Optional Lube oil minimum pressure switch Optional Lube oil maximum temperature switch Optional Lube oil temperature sender Optional Lube oil pressure sender Optional

Equipment: integrated fuel tank

Integrated fuel tank capacity 50 L Optional Integrated fuel tank capacity 120 L Optional Integrated fuel tank capacity 350 L Optional Integrated fuel tank capacity 800 L Optional Leak proof tray sized for integrated fuel tank capacity Optional

Equipment: underground fuel tank

1.000 L underground storage fuel tank with double wall Optional 2.000 L underground storage fuel tank with double wall Optional 3.000 L underground storage fuel tank with double wall Optional 5.000 L underground storage fuel tank with double wall Optional 10.000 L underground storage fuel tank with double wall Optional 15.000 L underground storage fuel tank with double wall Optional

Equipment: outdoor single-wall tank

1.000 L outdoor storage fuel tank with single wall and leak proof tray Optional 2.000 L outdoor storage fuel tank with single wall and leak proof tray Optional 3.000 L outdoor storage fuel tank with single wall and leak proof tray Optional 5.000 L outdoor storage fuel tank with single wall and leak proof tray Optional 10.000 L outdoor storage fuel tank with single wall and leak proof tray Optional 15.000 L outdoor storage fuel tank with single wall and leak proof tray Optional Automatic refilling system Optional

Equipment: outdoor double-wall tank

1.000 L outdoor storage fuel tank with double wall Optional 2.000 L outdoor storage fuel tank with double wall Optional 3.000 L outdoor storage fuel tank with double wall Optional 5.000 L outdoor storage fuel tank with double wall Optional 10.000 L outdoor storage fuel tank with double wall Optional 15.000 L outdoor storage fuel tank with double wall Optional

Equipment: protections

Heating parts guard Optional Moving parts guard Optional

Equipment: assembly

Alternator assembled by flexible joint Optional Anti-vibration mountings Optional Flexible coupling disc Optional Screwed steel frame Optional Welded steel frame Optional

Equipment: excitation system

Self-excited Optional Separately-excited by P.M.G. Optional Anti-condensation heater Optional Tropicalization treatment Optional Winding leads Optional 1-phase sensing input Optional 2-phase sensing input Optional 3-phase sensing input Optional

Equipment: drive-in-parallel

CT for parallel running with other gensets Optional cosPhi regulator Optional